Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes W211

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Mercedes W211, start by inserting the key into the ignition and turning it to the first position. Press the button on the left side of the left steering wheel spoke until the outside temperature appears.

Now, press the button to the left of the clock until "ub." appears. Next, press the down arrow button once, then press the "-" button until you reach the "confirmation" message.

Press the button on the bottom of the left steering wheel spoke once, then press it a second time to display "service confirmed." Finally, turn the key to remove it, and the service light has been reset.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Reset Service Alerts on the Mercedes E-Class W211
How to Reset Service Alerts on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) In today's tutorial video, you will learn how to reset the service alerts or the maintenance oil change light on the Mercedes Benz E-Class W211. Firs…
Where is the OBD2 port located on the Mercedes E-Class W211?
Where is the OBD2 port located on the Mercedes E-Class W211?
Mercedes Classe E (2002-2009 / W211) If you want to independently locate the OBD2 port inside your Mercedes E-Class W211, just read the following guide carefully and follow the steps des…
How to Reset the Service Light in the Mercedes E-Class?
How to Reset the Service Light in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) In this tutorial, you can see how to reset the service light in the Mercedes E-Class, an extremely simple and quick operation to perform only after c…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos