Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How do you replace the fuel filter of the Mercedes Classe A?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Diesel filter
Operation: How do you replace the fuel filter of the Mercedes Classe A?

In order to replace the fuel filter of the Mercedes Classe A, you need to open the hood so that you have access to the components located inside the engine compartment. On the left side, you will be able to locate the filter. It needs to be disconnected from the fuel supply pipes so that it can be removed from its housing. Once the old filter has been removed, you can insert the new one into its housing, reconnect the pipes, and verify that everything is functioning correctly.


Posted on 18 January 2024 by ScegliAuto



How to remove the fuel filter on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Do you want to do the maintenance on your Mercedes A-Class yourself without spending money on labor? Let's see in this video how to work alone and in
How to replace the diesel filter on Mercedes Benz A-Class 180 CDI W176
Mercedes Classe A (2012-2018 / W176) The guide shows how to replace the diesel filter of the Mercedes Benz A-Class 180 CDI W176. The location of the fuel filter is in the engine compartm
How to open the fuel tank cap of the Mercedes A-Class.
Mercedes Classe A (2012-2018 / W176) To open the fuel cap of the Mercedes Classe A, it is necessary to unlock the vehicle's opening with the key. In fact, the central locking system does

    Frequently Asked Questions

    • Classe A 1997-2004 - Where is the Mercedes A-Class diesel filter located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos