Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Fuel Filter on the Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Diesel fuel filter

See other generations:
Video tutorial

This guide will show you how to remove and replace the diesel fuel filter on the Mercedes A-Class. First, open the hood of the vehicle and locate the diesel fuel filter, which is positioned at the top right; then disconnect the fuel lines from the filter by releasing the tabs, and unplug the electrical connector, as shown in the video.

At this point, remove and replace the diesel fuel filter cartridge with the new one, reconnecting it; during the first engine start, it may take a few extra seconds due to the filter filling up.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on a Mercedes A-Class
Replacing the Fuel Filter on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. Replacing the fuel filter on a Mercedes A-Class? Let's see how to remove the fuel filter. Lift the hood of the car, locate the fuel filter as shown.. …
How to Replace the Fuel Filter on a Mercedes A-Class?
How to Replace the Fuel Filter on a Mercedes A-Class?
Mercedes Classe A (1997-2004 / W168) .. To replace the fuel filter on the Mercedes A-Class, open the hood to access the engine compartment and locate the filter, which is situated in the.. …
Replacing Diesel Filter on Mercedes A-Class W177
Replacing Diesel Filter on Mercedes A-Class W177
Mercedes Classe A (2018-2026 / W177) .. and replace the diesel filter on a Mercedes A-Class W177. First, lift the vehicle and use a wrench to remove the screws from the indicated aluminum.. …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos