Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Diesel Filter on a Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Diesel fuel filter

See other generations:
Video tutorial

On the Mercedes A-Class, the diesel filter is located in the engine compartment and is easily recognizable because it is a cylinder with a metal cover and fuel lines connected at the top. Once you locate the filter, work on the clamps that secure the hoses to the cover: in the video, the clamps are loosened, and the connections are released to remove the hoses from the filter.

At this point, handle the filter carefully to avoid bending the rigid hoses and stressing the lines: the goal is to disconnect just enough to remove the filter and replace it with a new one. When installing the replacement, ensure the hoses are reattached exactly as they were and tighten the clamps securely: they must hold without cutting into the rubber and, most importantly, should not allow any leaks.

After reassembly, before starting the engine, proceed to prime the system: in the video, the key is turned to the "ON" position to activate the system and help refill the filter. Only after this step should you proceed with starting the engine.


Posted on 2 August 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2012-2018 / W176) .. Replacing the fuel filter on a Mercedes A-Class? Let's see how to remove the fuel filter. Lift the hood of the car, locate the fuel filter as shown.. …
Mercedes Classe A (2004-2012 / W169) .. replace the diesel fuel filter on the Mercedes A-Class. First, open the hood of the vehicle and locate the diesel fuel filter, which is positioned at.. …
Mercedes Classe A (2004-2012 / W169) .. the battery in the key fob for the Mercedes A-Class W169, as well as the B-Class W246 and C-Class W204. First, take your key fob and remove the physical.. …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos