Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Shock Absorber Replacement and Suspension Maintenance

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Shocks

See other generations:
Video tutorial

This replacement is not too difficult even if you don't have a lift to raise the car. Start by removing the protective panel underneath by unscrewing the various bolts. Now, unscrew the bolt that secures the bottom of the shock absorber to the hub, and relieve the pressure from the shock absorber using a jack.

Next, remove the spring. Unscrew the bushing that held the spring, and by removing the additional bolt that secures the suspension, you can take out the shock absorber.

Insert the new shock absorber and retrace all the previous steps to reassemble the suspension.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Rear Shock Absorber Replacement for Mercedes A-Class
Rear Shock Absorber Replacement for Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Replacing the rear shock absorbers is significantly easier than the front ones since the spring and shock are not co-axial; lift the vehicle and remo…
How to Replace the Flywheel on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) Replacing the flywheel and clutch assembly on the vehicle is a rather complex operation. Assume that you have already removed the engine from the cha…
How to Replace the Rear Shocks of the Mercedes A-Class
How to Replace the Rear Shocks of the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Replacing the rear shocks on this model is a job that can be easily done yourself and becomes even simpler if you have a lift; start by raising the v…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos