Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shocks of the Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Shocks

See other generations:
Video tutorial

Replacing the rear shocks on this model is a job that can be easily done yourself and becomes even simpler if you have a lift; start by raising the vehicle and then remove the rear wheel (this is not necessary but improves maneuvering space); then apply a jack to support the rear suspension during the shock removal, unscrew the lower eyelet mounting bolt, then remove the upper one and take out the old shock; then install the new one, securing it with the respective bolts.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (1997-2004 / W168) .. and remove the rear seats of the Mercedes A-Class. First, we open the rear doors of the car and start pulling the lever at the bottom of the seats.. …
Mercedes Classe A (2004-2012 / W169) Replacing the rear shock absorbers is significantly easier than the front ones since the spring and shock are not co-axial; lift the vehicle and remo…
Mercedes Classe A (1997-2004 / W168) To replace the rear shock absorbers, you need a lift and a hydraulic jack; lift the vehicle on the lift and remove the rear wheel; locate the two mou…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos