Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Shock Absorber on a Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shocks

See other generations:
Video tutorial

Carefully follow these steps to remove a shock absorber on a Mercedes A-Class: Loosen the wheel bolts, lift the car on a column lift, and remove the wheel. Spray the shock absorber with penetrating oil, then use a screwdriver to remove the screws from the plastic inner fender.

Next, unscrew the oil line mounting bolts and the vertical arm bolt. If the bolt does not come out, use a hammer and penetrating oil to help.

Lower the lift and unscrew the bolts on the engine bay side, then pull the shock absorber out of its housing and separate the spring using the appropriate tool. Insert the new spring, and after it is installed, place the shock absorber back into its housing.

First, tighten all the bolts at the top in the engine bay, then secure the bottom. Bolt the vertical arm to the wheel hub and the shock absorber.

Tighten all the bolts with their associated parts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Shock Absorber on a Mercedes A-Class
How to Remove the Front Shock Absorber on a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. remove the front shock absorber on a Mercedes A-Class? The first step: Lift the hood and secure it, then use a socket wrench to remove the mounting bolts.. …
How to Remove the Starter Motor on Mercedes A-Class
How to Remove the Starter Motor on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) ..ow to remove the starter motor on a Mercedes A-Class. Remove the engine cover, disconnect the starter motor power terminals using pliers or a screwdriver d.. …
Rear Shock Absorber Replacement for Mercedes A-Class
Rear Shock Absorber Replacement for Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Replacing the rear shock absorbers is significantly easier than the front ones since the spring and shock are not co-axial; lift the vehicle and remo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos