Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Body

See other generations:
Video tutorial

Today's guide will show you how to open the hood of the Mercedes C-Class by following these simple steps. First, open the driver’s side door and pull the red lever located at the bottom, above the pedal area; then move to the front of the vehicle and unclip the lock lever found in the center between the bumper grille and the hood itself, as shown in the video.

Now, lift the hood held by the hydraulic struts; to close it, simply lower it and apply slight pressure.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Open the Hood of the Mercedes-Benz C-Class
How to Open the Hood of the Mercedes-Benz C-Class
Mercedes Classe C (2014-2021 / W205) .. you how to open the hood of the Mercedes-Benz C-Class, as well as other models from the manufacturer, in simple and quick steps. First, get in the vehicle.. …
How to Open the Hood of the Mercedes C-Class
How to Open the Hood of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. access the engine compartment of the Mercedes C-Class. First, open the driver's side front door and pull the plastic lever located at the bottom, near.. …
How to Open the Hood Vertically on a Mercedes C-Class
How to Open the Hood Vertically on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. how to open the hood vertically on a Mercedes C-Class. This feature allows for better access to the engine, making it easier to work on. On the right.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos