Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Temperature Sensor on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Accessory kit

First, lift your vehicle and ideally place it on jack stands to work more comfortably on the underside where the part to be replaced is located. Once done, remove the under-engine panel by unscrewing the bolts that hold it in place. This will help you locate the sensor, which is in the center of the vehicle. Disconnect the connector, and using a screwdriver, proceed to extract the sensor. Finally, retrace your steps to reinstall.

Updated on 24 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. the outside temperature sensor on a Mercedes C-Class, open the hood and loosen the bolts that secure the grille at the front of the engine compartment... …
Replacement of the internal air temperature sensor of the Mercedes C-Class
Replacement of the internal air temperature sensor of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. on the front passenger side, of the Mercedes C-Class. First, we open the front door of the car and start removing the plastic cover found under the.. …
How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. The outside temperature sensor on the Mercedes C-Class is located just behind the grille. To access it, you need to reach the bottom of the front bumper.. …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos