Do it yourself
Frequently asked questions about cars and motorcycles

Replace the bulbs of the front headlights of the Mercedes Benz C-Class w202.

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Headlight

The guide shows how to replace the bulbs of the front lights of the Mercedes Benz C-Class w202. After opening the hood, from the back of the headlight in question, remove the bulb holder cover. The parking lights are located on the outer edge of the headlight and to remove them you just need to pull the bulb holder. The low beam bulb is removed after disconnecting the electrical connector and pulling the metal locking tab. To replace the fog lights, located below the low beams, it is necessary to disconnect the two electrical cables. Once the metal pin is unlocked, the bulb can be removed. The high beams are located inside the headlight; after removing the bulb holder cover, disconnecting the cable and unlocking the fixing clip, the bulb can be removed. Before closing everything, check the correct functioning of the headlights.

Posted on 15 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe C (1993-2000 / W202) In this video tutorial, we will see how to remove the serpentine belt or alternator belt on the Mercedes-Benz C-Class W202, second generation. First,…
Mercedes Classe C (1993-2000 / W202) The reset of the service indicator light on a Mercedes Benz C-Class, W202 model, is a very simple operation that can be carried out independently, al…
Mercedes Classe C (2007-2013 / W204) Want to replace the headlight bulbs on your Mercedes C-Class? Lift the hood to access the front headlights. Locate the headlight inspection cover (lo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos