Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : After market Xenon headlight accessory kit installation

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Xenon headlight kit
Operation: After market Xenon headlight accessory kit installation

For this operation it is necessary to obtain the lamp conversion kit. For the necessary you need: a nose pliers, a hand drill and a hole saw. Open the bonnet and locate the back of the headlight. Remove the protection, remove the bulb holder, remove the spring and the bulb from the headlight. With pliers, bend the terminals of the lamp holding spring. With the drill, make a hole in the cover of the protection large enough to pass the cable stop Open the package of the new lamp by removing the packaging and absolutely without touching the glass bulb with your hands put the lamp in the headlight paying attention to the notches. reference, the lamp must be mounted precisely and in the right direction. Close the retaining spring and slide the lamp holder onto the lamp connector. Put the metal protection back on, close it and check for correct operation.


Posted on 25 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos