Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper on a Mercedes-Benz C-Class, loosen the screws that secure it to its housing: these are located at the front, on both ends of the bumper. Once these screws are loosened, proceed to loosen the screws located inside the trunk and inside the two rear wheel wells.

When all these screws are loosened, you can completely detach the bumper from its position to install the new replacement part. After installation, secure everything with the appropriate screws.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. and replace the rear bumper of the Mercedes C-Class. First, open the trunk and start by removing the trunk floor; remove the clips underneath and unscrew.. …
Mercedes Classe C (2007-2013 / W204) .. replacement of the rear bumper of the Mercedes C-Class. First, we open the rear hatch of the trunk and begin to unscrew all the fastening screws we find.. …
Mercedes Classe C (2014-2021 / W205) .. and replacing the rear bumper on a Mercedes C-Class. First, open the trunk lid and start unscrewing all the fastening screws located at the top. Next,.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos