Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the rear bumper of the Mercedes C-Class

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Rear bumper

Below are the instructions on how to disassemble and replace the rear bumper of the Mercedes C-Class. First, open the rear hatch of the trunk and start removing the floor of the compartment; remove the clips found underneath and unscrew the fastening screws located inside the bumper, as shown in the video. At this point, unscrew the additional screws located under the bumper and on both sides of the rear wheel arches; unhook the bumper on the sides until it is completely removed, replacing it if necessary with a new one, and finally reassemble everything!

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe C (2007-2013 / W204) .. replacement of the rear bumper of the Mercedes C-Class. First, we open the rear hatch of the trunk and begin to unscrew all the fastening screws we find.. …
Mercedes Classe C (2007-2013 / W204) .. the front bumper grille of the Mercedes C-Class. First, open the hood of the vehicle and disconnect the plastic hose located behind it; then move.. …
Mercedes Classe C (2007-2013 / W204) .. of removing the rear bumper on a Mercedes C-Class. Lift the trunk to access the various screws that secure the bumper. Remove the cover under the.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos