Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Rear Bumper on Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Rear bumper

Let's go through the process of removing the rear bumper on a Mercedes C-Class. Lift the trunk to access the various screws that secure the bumper. Remove the cover under the trunk, then unscrew the screws located at the top of the bumper. After removing the screws at the top, unscrew the screws from inside the wheel well, and finally remove the screws at the bottom of the bumper. Pull the bumper away from the vehicle body by hand. Position the new bumper onto the vehicle body and tighten all the screws. Reattach the trim pieces in the trunk.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Mercedes C-Class
How to Remove the Rear Bumper of a Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. How to remove the rear bumper of a Mercedes C-Class? Follow these steps carefully. This operation is not too complex if done in order. First, use a.. …
Disassembly of the rear bumper of the Mercedes C-Class
Disassembly of the rear bumper of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. and replace the rear bumper of the Mercedes C-Class. First, open the rear hatch of the trunk and start removing the floor of the compartment; remove.. …
Replacement of the rear bumper of the Mercedes C-Class.
Replacement of the rear bumper of the Mercedes C-Class.
Mercedes Classe C (2014-2021 / W205) .. and replace the rear bumper of the Mercedes C-Class. First, we open the rear trunk door and start unscrewing all the fixing screws we find on the top.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos