|
Do it yourself
| |||
| ||||
How to Install a Backup Camera on a Mercedes C-Class
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
Today, with the help of the following video tutorial, you will learn how to install a backup camera on a 2008 Mercedes C-Class. Start the installation by removing the trunk lid panel to access the license plate lights. Continue by removing the internal Torx screws located near the lock and the external screws on the sides of the license plate. Now, connect the internal wiring of the license plate lights to the wiring of the camera and install it on one of the lights. Next, reassemble the panel and route the wires inside the vehicle to connect them to the radio. Finally, connect the wires to the radio and test the camera's functionality.
Updated on 6 October 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
.. the backup camera fuses on the Mercedes-Benz C-Class W205: on the passenger side, find the main fuse box. You will need to remove a cover located in.. …
Mercedes Classe C
(2007-2013 /
W204)
.. an aftermarket backup camera on the Mercedes C-Class W204: Remove two Torx screws and four dashboard screws, then disconnect the light connector and.. …
Mercedes Classe C
(2014-2021 /
W205)
.. multifunction camera located on the Mercedes C-Class W205: this operation should be done with the vehicle turned off, by removing the cover of the rain.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |