Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tire Pressure Light on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

The tire pressure light that appears on the instrument cluster of the Mercedes-Benz C-Class can be reset by checking the display to see which of the four tires has an incorrect pressure value. This way, you can inflate the indicated tires to the recommended pressure: this value is written inside the fuel filler door.

Once the tires have been inflated, turn on the instrument cluster and access the menu using the controls on the left side of the steering wheel: select "Service" and then "Tire pressure," and press the button with the down arrow to turn off the light.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. To reset the tire pressure light on a Mercedes-Benz C-Class, turn on the ignition and navigate through the menu using the buttons on the left side of.. …
Mercedes Classe C (2007-2013 / W204) .. the tire pressure warning light on a Mercedes C-Class, start by turning on the instrument panel without starting the engine. Then, use the buttons on.. …
Mercedes Classe C (2014-2021 / W205) .. to reset the tire warning light on a Mercedes C-Class, a very simple and quick operation to perform only after restoring the correct pressure in each.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos