Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg Hs
    4. : Fuse box

MG HS - Fuse box

Fuse Box MG HS (2019-2026 / mk 1)

MG HS (2019-2026 / MK 1)
What is the Fuse Diagram for the MG HS?
If any devices in your MG HS have suddenly stopped working, first check the status of the relevant fuses, the diagrams for which are shown in this video. The …Read all…
Posted on 1 March 2026 by ScegliAuto
MG HS (2019-2026 / MK 1)
What is the fuse layout of the MG HS?
In this video we can see where the fuse boxes of the MG HS are located, useful in case we need to check the fuses of a malfunctioning device. We find the first …Read all…
Posted on 30 October 2024 by ScegliAuto
MG HS (2019-2026 / MK 1)
Where is the fuse box of the MG HS located?
The MG HS has two fuse boxes inside. The first fuse box is located inside the cabin, behind the passenger side glove compartment. The second fuse box is …Read all…
Posted on 20 May 2024 by ScegliAuto
MG HS (2019-2026 / MK 1)
Where to Find and How to Access the Fuse Box on an MG eHS?
Hello, today you will learn how to access the fuse box on your MG eHS. Start by opening the door on the right side of the driver. After opening it, you will …Read all…
Posted on 16 September 2026 by ScegliAuto
Car stereo (1) Body (1) Key (3) Onboard computer (2) Checks and maintenance (3) Clock (1) Brake pads (1) Fuse box (4) Suspension system (1) (7) Tire pressure warning light (2) Service warning light (10) Fuel cap (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos