Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the MG ZS EV

Model: MG ZS MK 2 - Years: 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Let's see how to reset the tire pressure warning light on the MG ZS EV: first, we need to find the correct values on the sticker located on the driver's side door jamb; check and adjust the tire pressure to the recommended value. Get into the car and turn on the ignition, then navigate to the "vehicle settings" menu on the touchscreen.

Find the TPMS menu within the settings and start the calibration. The system will show a confirmation and start the auto-learning procedure.

Now, drive a few kilometers at a moderate speed for about 10-15 minutes: this is the time needed for the TPMS sensors to transmit the new pressure data to the control unit; at this point, the warning light will turn off automatically.


Posted on 11 October 2025 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the MG ZS
How to reset the tire pressure warning light on the MG ZS
MG ZS (2017-2024 / Zs11) The illumination of the tire pressure warning light on the instrument panel indicates a possible loss of pressure or puncture in one or more tires; l…
How do you reset the tire pressure warning light on the MG ZS?
How do you reset the tire pressure warning light on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to reset the tire pressure warning light of the MG ZS, you will need to inflate the tires to the recommended pressure value: this value is i…
How to reset the service light on the MG ZS
How to reset the service light on the MG ZS
MG ZS (2017-2024 / Zs11) Today we will explain how to reset the maintenance light for the MG ZS car. To reset the light, we need to turn on the vehicle and press the menu but…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos