Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads of the MG HS

Model: MG HS MK 1 - Years 2019-2026
Part: Brake pads

These short and simple steps will show us how to disassemble and replace the rear brake pads of the MG HS. First, we lift the car and start by removing the rear wheel; then we unscrew the fastening screws of the brake caliper, in order to detach it and remove it from the brake disc (applying pressure on the caliper piston), as shown in the video. At this point, we remove the old brake pads, clean the caliper from any residual dirt; install the new original brake pads and reassemble the braking system.

Posted on 9 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to get on board an MG HS and start when the remote control is dead
How to get on board an MG HS and start when the remote control is dead
MG HS (2019-2026 / MK 1) In this video we see how to enter a MG HS and start it even if the remote battery is dead. On the outside of the remote there is a small button: by p…
What is the fuse layout of the MG HS?
What is the fuse layout of the MG HS?
MG HS (2019-2026 / MK 1) In this video we can see where the fuse boxes of the MG HS are located, useful in case we need to check the fuses of a malfunctioning device. We find…
What is the Fuse Diagram for the MG HS?
What is the Fuse Diagram for the MG HS?
MG HS (2019-2026 / MK 1) If any devices in your MG HS have suddenly stopped working, first check the status of the relevant fuses, the diagrams for which are shown in this vi…

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos