Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light in the MG ZS?

Model: MG ZS Zs11 - Years 2017-2024
Part:

Below you will find information on how to correctly reset the tire pressure warning light in the MG ZS. The steps are very simple and quick. As advised in the video, it is important to inflate the tires to the correct pressure before proceeding. Once this is done, turn on the ignition and you will notice the warning light illuminated. At this point, inside the cabin, look for the reset button, usually located near the gear shift. Press and hold the button for a few seconds, typically between 3 and 5 seconds, to completely reset the light. Once this is done, it is recommended to take a short drive to check if the reset was successful. As always, if the light remains on, it is best to consult an expert.

Posted on 21 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the MG ZS
How to reset the service light on the MG ZS
MG ZS (2017-2024 / Zs11) Today we will explain how to reset the maintenance light for the MG ZS car. To reset the light, we need to turn on the vehicle and press the menu but…
How do you reset the tire pressure indicator light on the MG ZS?
How do you reset the tire pressure indicator light on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to reset the tire pressure warning light that appears on the instrument panel of the MG ZS, you need to inflate the tires to the recommended…
How do you reset the tire pressure warning light on the MG ZS?
How do you reset the tire pressure warning light on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to reset the tire pressure warning light of the MG ZS, you will need to inflate the tires to the recommended pressure value: this value is i…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos