Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. : Cyberster

Where is the smartphone charging point on the MG Cybester?

Model: MG Cyberster MK 1 - Years 2024-2026
Part: Onboard computer

Let's see where the smartphone charging point is located on the MG Cybester: it is not in a conventional place, but we need to lift the central armrest, and underneath it, we will find the charging ports, both the USB Type C and the standard Type A USB. We can also place the phone in the designated wireless charging area located in front of the armrest itself. When the armrest is lowered, in the driving position, access to the ports is blocked, so to charge a device, you need to keep the armrest lifted or use a long enough cable to pass the connector over it. It is an elegant solution that keeps the dashboard clean, but it is a bit less practical while driving.

Posted on 4 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Position of the wireless charging unit on the Opel Grandland-X
Position of the wireless charging unit on the Opel Grandland-X
Vauxhall Grandland X (2017-2024 / MK 1) On the Opel Grandland-X, like on almost all recent cars, there is a wireless charging station for charging your smartphone, which allows you to charg…
How to connect Android Auto to an Aiways vehicle?
How to connect Android Auto to an Aiways vehicle?
AIWAYS U6 (2021-2026 / MK 1) In this video, we will see how to connect Android to the Aiways U5. Aiways is a Chinese brand that was founded in 2017 and exclusively produces elect…
How to recharge the battery of the Aiways U6.
How to recharge the battery of the Aiways U6.
AIWAYS U6 (2023-2026 / MK 1) In this short and simple guide, we will see how to recharge the battery of the Aiways U6, following the instructions below. First, position yourself …

How to Remove the Air Fan from a Nissan Juke

Learn how to remove the air fan from a Nissan Juke. Open the glove compartment and disconnect the end stop brackets, then unscrew the securing screws with a screwdriver. Unscrew the side screws in the glove compartment and remove the plastic door. Unscrew the screws again, and after disconnecting the power wires, pull the glove compartment out from the dashboard. Remove the fan after disconnecting the power wires. Clean the fan as necessary (disassemble the fan and its parts). Finally, reinstall the previously removed fan (new fan) and all its components under the glove compartment.

Watch the video!


by ScegliAuto

More videos