Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Regulator Motor from a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Starter motor

How do we remove the right door panel of a Peugeot 106? Let's see together in this video how to proceed. Use a lever to remove the plastic cover of the door handle, then, with a screwdriver, undo the securing screws on the plastic panel. Once all the screws are removed, detach the plastic clips that secure the door. Remove the window crank. With your hands, take off the door panel, disconnect any power connectors and release cable. Remove the window regulator motor inside the door by peeling off the adhesive protection.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the side glass of the Peugeot 106
Disassembly of the side glass of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the side glass of the front door of the Peugeot 106. First o…
Guide to Replacing the Spark Plug Leads on a Peugeot 106
Guide to Replacing the Spark Plug Leads on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this brief and simple guide, follow the main steps to remove and replace the spark plug leads on a Peugeot 106. First, open the bonnet of your car…
How to start a Peugeot 106?
How to start a Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) To start a Peugeot 106, follow these steps. Make sure the car is in neutral and the handbrake is pulled. Insert the key into the ignition and turn th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos