Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Starter Motor of the Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Starter motor

This guide briefly outlines the steps to remove, replace, or repair the starter motor of the Peugeot 106, following the instructions below. First, open the bonnet and disconnect the battery; then, unscrew the securing bolts and disconnect the electrical connector to remove the starter motor, as shown in the video. At this point, the repair of the starter motor is demonstrated; replace it directly if necessary, applying the reverse procedure for reassembly!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Starter Motor
Instructions for Removing the Starter Motor
Peugeot 106 (1991-2004 / MK 1) Before proceeding with the removal of the starter motor, it is advisable to disconnect the battery terminals to then disconnect the power cables of t…
Where are the fuses located in the Peugeot 106?
Where are the fuses located in the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) Each fuse in the Peugeot 106 is located within the designated fuse boxes installed in the vehicle. In this type of vehicle, you will find two boxes c…
Where is the OBD2 port located in the Peugeot 106?
Where is the OBD2 port located in the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) If you own a Peugeot 106 and want to easily find the OBD2 port in the car, all you have to do is follow the steps described in the following guide. F…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos