Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on the MG 5

Model: MG 5 MK 2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuel filter

See other generations:
Video tutorial

This guide provides the necessary instructions to disassemble and replace the fuel filter on the MG 5. First, raise the vehicle on the right rear side to access the fuel filter located under the body; then, use the appropriate wrench to remove it, disconnecting the electrical connector and the fuel lines, as shown in the video.

At this point, install the new fuel filter by gently screwing it in; reconnect all the lines, checking their condition (replacing them if necessary), and then start the engine!


Posted on 27 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the MG 5
How to Replace the Cabin Air Filter on the MG 5
MG 5 (2012-2018 / Ap12) To replace the cabin air filter on this vehicle, follow the DIY instructions below and check the video as well. Access the passenger seat; the filter…
How to Replace the Air Filter on the MG 5?
How to Replace the Air Filter on the MG 5?
MG 5 (2012-2018 / Ap12) To replace the air filter on the MG 5, open the hood to access the filter box located in the engine compartment. The box is positioned near the right…
How to Replace the Air Filter of the MG 5
How to Replace the Air Filter of the MG 5
MG 5 (2012-2018 / Ap12) Today, we will see in this video tutorial how to remove and replace the engine air filter of the MG 5 in simple and quick steps. First, open the hood…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos