Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the front hood of an MG TF

Model: MG MG Various
Part: Body

Before we can begin, we will have to go and head to the rear engine hood of our MG TF. Let's start by opening the tailgate of the rear luggage compartment, using the car key. By doing so, we will have reached the lever that releases the front hood locking hook, which we will have to pull slightly towards us. Once this is done, we will have to head towards the front hood. At this point, we will have to go and lift the front hood, and then fix it with the appropriate rod. By the time we have completed this last step, we will have successfully opened the front hood of our MG TF.

Posted on 26 April 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the MG GS headlight bulb?
How to replace the MG GS headlight bulb?
MG MG Various In order to replace the MG GS headlight bulb, you need to open the hood to access the rear part of the headlight corresponding to the bulb to be repl…
How to replace the air filter in the MG HS?
How to replace the air filter in the MG HS?
MG MG Various In this tutorial we can see how to replace the air filter in the MG HS, an extremely simple and fast operation. Before proceeding, make sure the engi…
How to replace low beam bulbs in MG ZR?
How to replace low beam bulbs in MG ZR?
MG MG Various As we can see in this tutorial, replacing the headlight bulbs in your MG ZR is a very simple operation. Before proceeding, let's make sure that the k…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos