Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Mg 3 front brake pads and discs

Model: MG 3 MK 2 - Years 2011-2024
Part: Brake rotors

Today we will see, in this video tutorial, how to remove and replace the front brake pads of the Mg 3. First of all we lift the car and start removing the wheel; then we are going to unscrew and remove the screws of the front brake caliper, removing it from the disc, as shown in the video. At this point we remove the old brake pads and unscrew the screws of the brake disc to replace it with the new one; let's clean up the dirt from the caliper and install the new brake pads accordingly, following the video tutorial until the end for reassembly!

Posted on 21 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Replace the front brake pads and brake discs of the MG 3
Replace the front brake pads and brake discs of the MG 3
MG 3 (2011-2024 / MK 2) Today we will see, in this short and simple guide, how to disassemble and replace the front brake pads of the MG 3, following the instructions below.…
Positioning and layout of the fuses of the Mg 3
Positioning and layout of the fuses of the Mg 3
MG 3 (2011-2024 / MK 2) Today we will see, in this video tutorial, the positioning and the diagram of the fuses of the Mg 3, following these simple steps. First of all, let'…
What is the fuse layout of the MG3?
What is the fuse layout of the MG3?
MG 3 (2011-2024 / MK 2) In this video we can see where the fuse boxes of the MG3 are located and what the respective diagrams are, useful in case we need to check the fuses …

Other guides you may be interested in

How to Change the Oil in the Transmission of a Volvo XC70

Watch this video to learn how to change the oil in the transmission of a Volvo XC70. Position your car on a column lift and raise it to a comfortable height for disassembly. To change the transmission oil, you need to remove the bolts using a socket spanner. (follow the video) Once the bolts are removed, let the fluid drain into a container. Prepare to refit all the bolts on the transmission with the socket spanner, then top up with the appropriate transmission fluid. Finally, test the correct operation of the transmission.

Watch the video!


by ScegliAuto

More videos