Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Rear Camera on the MG ZS

Model: MG ZS Zs11 - Years 2017-2024

This guide provides the main instructions for installing the rear camera for parking maneuvers on the MG ZS. First, get in the vehicle and start installing the display, removing the plastic pillars to run the camera wiring, as shown in the video. Next, install the camera on the rear hatch or bumper; adjust it until you achieve the desired view, following the video tutorial to the end for complete installation!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

MG ZS (2017-2024 / Zs11) To install the backup camera on the MG ZS, use a tool to pry off the internal cover of the trunk. Underneath, you can insert the backup camera, fitti…
MG ZS (2017-2024 / Zs11) To replace the handbrake caliper on the MG ZS, you need to lift the car so that you can loosen the bolts securing the right rear wheel to the hub. On…
MG ZS (2017-2024 / Zs11) Installing a new armrest on the MG ZS without hiring a professional is possible. The only tool you need is a Phillips screwdriver or a power drill. F…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos