Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to apply accessories to the Mg Zs car and turn it into a sports car.

Model: MG 3 MK 1 - Years 2008-2011

As seen in the video, there are four accessory components that can be installed on the body of your Mg 3 car. Each component has a strong adhesive tape on the edge that will need to be removed during installation. Let's start with the rear spoiler. Place the spoiler and begin removing the adhesive while pressing the piece firmly onto the body. Then it will be time for the side fenders. Use some silicone to help it grip better since it is a long piece. Finally, the rear fender. Again, simply remove the adhesive tape and apply pressure.

Posted on 24 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the MG 3 front swing arm bushing
How to replace the MG 3 front swing arm bushing
MG 3 (2011-2024 / MK 2) In this video tutorial we will see the instructions that will allow us to disassemble and replace the bush of the front swinging arm of the MG 3. Fir…
How to replace the Mg 3 exhaust
How to replace the Mg 3 exhaust
MG 3 (2008-2011 / MK 1) If we want to proceed with a do-it-yourself intervention to replace and install a more performing exhaust terminal on our car, we can follow the inst…
Reset TPMS on a MG 3
Reset TPMS on a MG 3
MG 3 (2011-2024 / MK 2) In today's tutorial, we can see how to reset the TPMS light, which is the tire pressure warning light, on an MG 3, second-generation restyling model …

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos