Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue warning light in the MG Hector?

Model: MG Hector MK 1 - Years 2019-2026
Part: AdBlue warning light

If the AdBlue warning light comes on in the instrument panel of our MG Hector, it means that the liquid in the anti-pollution system has reached the minimum level and, consequently, it will need to be topped up. This is a very simple and quick operation, let's see how to proceed in this tutorial. First of all, we buy a can of urea at an auto parts store, then we turn off the engine and open the fuel door. Next, we unscrew the indicated blue cap, insert the can's tube into the hole, and pour in the necessary amount of liquid to reach the maximum level.

Posted on 12 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the MG Hector?
How do you reset the tire pressure warning light on the MG Hector?
MG Hector (2019-2026 / MK 1) In order to reset the tire pressure warning light on the MG Hector, you need to inflate the tires until they reach the recommended pressure value: th…
How to reset the partial kilometers of the MG Hector
How to reset the partial kilometers of the MG Hector
MG Hector (2019-2026 / MK 1) Today's video will show us how to reset the trip or partial kilometers of the MG Hector, following the instructions below. First, we get into the car…
How to replace the MG Hector fog light bulb
How to replace the MG Hector fog light bulb
MG Hector (2019-2026 / MK 1) In the following video we will see how to replace the fog lights in the MG Hector. In particular, the video will show the replacement of the LED fog …

Other guides you may be interested in

How to Remove the Front Seats from a Classic Fiat 500

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier.

Watch the video!


by ScegliAuto

More videos