Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Hector
    4. : How to replace the MG Hector fog light bulb

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Fog lights
Operation: How to replace the MG Hector fog light bulb

In the following video we will see how to replace the fog lights in the MG Hector. In particular, the video will show the replacement of the LED fog lights. Underneath the car, you will first need to remove some small bolts with the use of a screwdriver and pliers. In this way, by removing the cover, we will have access to the bulb to be replaced. At this point, after having found the fog light, you must first disconnect the bulb cables and, later, unscrew the bulb itself. Now you can insert the new bulb and reassemble everything following the reverse procedure.


Posted on 28 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos