Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Hector
    4. : How to replace the MG Hector key battery

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Key
Operation: How to replace the MG Hector key battery

If your MG Hector's smart key has suddenly stopped working, it is most likely time to replace the battery inside. Let's find out how to do it together. First remove the back cover with your own hands and unscrew the two screws located underneath with a suitable Phillips screwdriver (preferably a small size). Once this is done, also remove the battery holder and proceed with the replacement of the exhausted battery, paying attention to the full compatibility of the new one. Finally, put the cover back on correctly and you are done.


Posted on 19 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos