Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Hector
    4. : Replacing the battery of the Mg Hector

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Battery
Operation: Replacing the battery of the Mg Hector

Let's see in this guide how to disassemble and replace the battery of the Mg Hector, in simple and quick steps. First of all, open the bonnet and start by unscrewing the two fixing nuts of the central battery bracket, using a 10 mm Phillips or socket wrench; then we remove later, with the same key, both battery terminals (positive and negative pole), as shown in the video. Now remove the battery from the battery holder and replace it with the new one, with one of the same amperage; insert it correctly and carry out the wiring!


Posted on 24 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos