Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Hector
    4. : How to replace the MG Hector remote control battery?

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Key
Operation: How to replace the MG Hector remote control battery?

Replacing the MG Hector remote control battery is a very simple and fast operation, in this tutorial we can see how to proceed. To do this, we will need a small flat-tipped screwdriver, another with a cross-tip and a spare CR2032 battery. First of all we extract the emergency key by means of the action of the appropriate button, then we pry in the indicated slot to unlock the two halves of the remote control. Once fully opened, we unscrew the 3 internal screws, remove the plastic cover and proceed with the replacement of the battery.


Posted on 21 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos