Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the MG Hector

Model: MG Hector MK 1 - Years 2019-2026
Part: Cabin air filter

If you want to learn how to replace the cabin air filter in your MG Hector, follow these steps. This procedure is very similar to what you've seen in other car models. First, go to the front passenger seat and open the glove compartment. Then, remove the compartment by acting on the side clips and locate the box containing the air filter at the back. Finally, just remove the cover of the box and replace the filter.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a MG Hector?
How to Replace the Cabin Air Filter in a MG Hector?
MG Hector (2019-2026 / MK 1) In this tutorial, you will see how to replace the cabin air filter in a MG Hector, a very simple and quick operation. First, go to the passenger seat…
Where is the fuse box of the MG Hector located?
Where is the fuse box of the MG Hector located?
MG Hector (2019-2026 / MK 1) If you want to locate the fuse box inside your MG Hector on your own, just follow these simple steps. First, go inside the cabin and reach the driver…
How to Replace the Remote Battery in the MG Hector?
How to Replace the Remote Battery in the MG Hector?
MG Hector (2019-2026 / MK 1) To replace the battery in the MG Hector remote, first remove the emergency key from the top of the remote. This will allow you to pry open the back c…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos