Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. MG
  4. :
  5. Hector
  6. : How to replace the cabin filter in MG Hector?

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Cabin air filter
Operation: How to replace the cabin filter in MG Hector?

In this tutorial we can see how to replace the cabin filter in the MG Hector, an extremely simple and fast operation. First of all, let's go to the passenger seat, then open the glove compartment drawer and disengage it from the dashboard. Once this is done, shedding light with a torch, we identify and open the long rectangular door by unlocking its side clip. At this point we can remove the old filter, clean the housing thoroughly and insert the spare part, taking care to position it in the right direction, usually indicated on the edge of the same.


Posted on 21 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos