Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To remove the rear light of the Mini Countryman, how do you proceed?

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Tail light

Let's start by highlighting the model of car visible in the video, namely the classic Mini, which for the disassembly procedures of the rear lights and not only, is similar to the Mini Countryman, so it can be taken into consideration to understand how to carry out the work in question. How the removal is done on the specified model: The chrome frame of the headlight group is removed with a plastic bodywork lever, the 6 locking pins are unscrewed and finally access is gained to the luggage compartment, where laterally we find a small door, part of the carpet lining, to be opened, in order to access the power connector to be disconnected before pulling out the entire light.

Posted on 26 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear taillight of the Mini Countryman
How to replace the rear taillight of the Mini Countryman
Mini (2017-2023 / F60, Countryman2) Below we will see the instructions that will allow us to disassemble and replace the rear light of the Mini Countryman. First, we open the rear hatch…
Removal of the rear light of the Mini Countryman
Removal of the rear light of the Mini Countryman
Mini (2010-2016 / R60, Countryman1) In this guide we see the procedure on how to disassemble and replace the rear light of the Mini Countryman, following the instructions below. First w…
Removing the Mini Clubman rear light
Removing the Mini Clubman rear light
Mini (2010-2016 / R60, Countryman1) In this video tutorial we will see how to remove the rear light of a Mini Clubman. First of all we open the two doors of the trunk and remove the sid…

Other guides you may be interested in

How to Remove the DPF on a Citroen C4

Watch this video on how to remove the DPF from a Citroen C4. Lift the engine bonnet and secure it, then use a spanner to unscrew the locking bolt of the DPF sensor, and remove the securing pins. Once the part is removed from its location, use a screwdriver to disconnect the various wiring and pipes connected to the DPF. Remove the various components of the DPF and clean them with a suitable mechanical parts cleaning product. Once the part has been refurbished, assemble the pieces together. Finally, refit the DPF in the engine compartment, along with all the pins and associated parts.

Watch the video!


by ScegliAuto

More videos