Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Mini Classic

Model: Mini Mini Mark2 - Years 1967-1970
Part: Headlight

Let's discover the useful steps for disassembling and replacing the front headlight and its bulb of the Mini Classic. First, move to the front of the vehicle and start by removing the chrome frame of the front headlight; then unscrew all the screws found on the sides of the headlight to remove it, disconnecting the electrical connector of the low beam bulb, as shown in the video. At this point, replace the headlight or bulb with the new one, securing it properly and making the electrical connection, finally checking its operation!

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear taillight of the Mini Countryman
How to replace the rear taillight of the Mini Countryman
Mini (2017-2023 / F60, Countryman2) Below we will see the instructions that will allow us to disassemble and replace the rear light of the Mini Countryman. First, we open the rear hatch…
Replacement of the rear light bulb of the Mini Cooper.
Replacement of the rear light bulb of the Mini Cooper.
Mini (2014-2023 / F57, F54, F56, F55) In a few simple steps, we will see how to disassemble the rear light and replace its bulbs on the Mini Cooper. First, let's open the rear hatch of th…
Disassembly of the rear taillight of the Mini Cooper
Disassembly of the rear taillight of the Mini Cooper
Mini (2014-2023 / F57, F54, F56, F55) In this guide we will see the instructions that will allow us to disassemble and replace the rear taillight of the Mini Cooper. First of all, we open…

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos