Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset and reprogram the side windows of the Mini Cooper

Model: Mini Mini R57, R55, R56 - Years 2007-2014
Part: Checks and maintenance

Today we will discover the instructions that will allow us to reset and reprogram the mechanism of the side windows of the Mini Cooper. First of all, we get into the car and start the instrument panel; then we press and hold both window buttons for about ten seconds (opening the side windows), as shown in the video. At this point, we open the side doors and press the buttons again for ten seconds, this time raising the side windows; we turn off the instrument panel and then verify the correct functioning of the windows!

Posted on 28 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to program the key of the Mini Cooper
How to program the key of the Mini Cooper
Mini (2010-2016 / Countryman1, R60) After replacing the battery on a Mini Cooper vehicle, it may be necessary to reprogram the key. Today, with this short instructional video, we will e…
Resetting the brake wear indicator light of the Mini Cooper
Resetting the brake wear indicator light of the Mini Cooper
Mini (2007-2014 / R57, R55, R56) Let's see the instructions on how to reset the brake wear indicator light on the Mini Cooper, following these simple steps. It may sometimes be neces…
How to reset the service on a Mini Cooper R56.
How to reset the service on a Mini Cooper R56.
Mini (2007-2014 / R57, R55, R56) This video will show us how to reset the service in a Mini Cooper R56. To begin we will have to turn on the panel, displaying the message indicating …

    Frequently Asked Questions

    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos