Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you start the Mini Cooper?

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Checks and maintenance

In order to start the Mini Cooper, you will need to insert the remote control into the designated compartment located on the dashboard: this compartment is located to the right of the steering wheel. Once the remote control is fully inserted, you can press the accelerator and brake pedals: then you can press the engine start button located next to the compartment where the remote control was inserted. Once the insertion is complete, you can release the button and press it again only when you intend to turn off the car.

Posted on 9 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you disable the Start&Stop feature of the Mini Cooper?
How do you disable the Start&Stop feature of the Mini Cooper?
Mini (2017-2023 / Countryman2, F60) The deactivation operation of the Mini Cooper's Start&Stop is carried out by pressing the appropriate button on the dashboard: before pressing the bu…
How to reset the brake pad wear warning light on the Mini Cooper
How to reset the brake pad wear warning light on the Mini Cooper
Mini (2001-2007 / R52, R50, R53) Let's find out below the instructions that will allow us to reset the brake pad wear warning light of the Mini Cooper. First of all we get on board t…
How to replace the battery of a Mini Cooper key?
How to replace the battery of a Mini Cooper key?
Mini (2007-2014 / R56, R57, R55) Good morning, today's goal is to replace the battery of our Mini Cooper key. Let's start by unhooking and removing the back cover of the key, leverag…

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Replace the Front Headlight Bulbs on an Opel Mokka

Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the rubber inspection cap on the back of the headlight and remove it. Disconnect the bulb holder from the headlight and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs (always ensure they are the correct type and size) and insert the bulb holder back into the headlight housing. Reassemble all previously removed parts (headlight cover cap).

Watch the video!


by ScegliAuto

More videos