|
Do it yourself
| |||
| ||||
How to change the radiator of a Mini Cooper R50
Model: Mini Mini
R52, R50, R53
- Years 2001-2007
In this video, we will see how to change the radiator of a Mini Cooper R50: we will need to lift the vehicle and remove the left front wheel and the corresponding fender, and we will repeat the operation on the other side as well. We remove all the screws on the bottom of the bumper, while on the top there are two 30 bolts that we will remove. On the sides, there are two connectors to disconnect for the headlights, and of course also for the fog lights. We also remove the license plate and holder, and before finally removing the bumper, we check to remove the temperature sensor inside. To remove the protection bar, we will need to remove four bolts on each side. Now we remove all the bolts around the oil radiator, and once that is removed, we will also remove the radiator supports and all the protections around it. We place a large basin that can collect the liquid that comes out when we remove the pipe clamp; then we disconnect it from the fan and the damaged radiator is finally removed. We can find the new radiator, for example, on eBay with the code 375863960219 at a price of 59.76 euros, with free delivery. We reinstall it immediately on the fan, reconnect the coolant pipe. The protections, the oil radiator. We start the engine with the fan at minimum to refill the coolant and then bleed the system which should not contain any air. Once this is done, all that remains is to put the bumper back in place.
Posted on 6 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2001-2007 /
R52, R50, R53)
In today's video tutorial we will see how to disassemble the engine cooling radiator on a Mini Cooper R50. First let's go to remove our front bumper;…
Mini
(2001-2007 /
R52, R50, R53)
Let's find out in this video the procedure that will allow us to remove and replace the thermostat on the Mini Cooper R50 first series. First of all,…
Mini
(2001-2007 /
R52, R50, R53)
If you own a 2003 Mini Cooper R50 and want to find out where the OBD port is located, you just need to read the following guide and apply what is des…
Other guides you may be interested in
|
How to Remove the Front Headlamp on a Renault Megane
Let's see how to remove the front headlamp on a Renault Megane. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Unscrew the headlamp securing bolts with a screwdriver, along with the associated clips, and extract the headlamp from its housing. Once the headlamp is removed (located at the rear of the headlamp), take it out, and you will find the bulbs with metal clips. Pull out the bulb holder from the headlamp and extract the damaged bulb using a screwdriver. Install the new bulb (always ensure it is the correct type and size) and insert the bulb holder back into the headlamp housing. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |