Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restart the onboard computer of the 2025 Mini Countryman

Model: Mini Mini Countryman3, U25 - Years 2024-2026
Part: Onboard computer

Today we will show you how to independently restart the new intelligent screen of the 2025 Mini Countryman without using a diagnostic computer and the OBD socket. To restart the intelligent system, we need to hold down the button above the volume controls for about 30 seconds. Release the button and wait for the operating system to be rebooted on the onboard computer; once it is accessible again, we can set the new parameters. After setting the new parameters, restart the instrument panel. These steps can also be performed on other 2025 Mini vehicles.

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the language on the onboard computer of the 2017 Mini Countryman?
How to change the language on the onboard computer of the 2017 Mini Countryman?
Mini (2017-2023 / Countryman2, F60) Changing the language of the multimedia content of the 2017 Mini Countryman's onboard computer is a very simple operation that can be done independen…
How do you program the key for the Mini Countryman?
How do you program the key for the Mini Countryman?
Mini (2010-2016 / Countryman1, R60) In order to program the key of the Mini Countryman, you need to insert it into the corresponding ignition slot. Once the key is inserted, you can con…
How to reset the tire pressure sensor on the Mini Countryman
How to reset the tire pressure sensor on the Mini Countryman
Mini (2017-2023 / Countryman2, F60) Following this brief procedure, we will see how to reset the tire pressure warning light on the Mini Countryman; before performing the reset, it is n…

Other guides you may be interested in

How to Change the Cabin Filter on an Opel Mokka

Learn how to change the cabin filter fitted in the Opel Mokka. Open the glove compartment and disconnect the plastic guides (located on the sides of the drawer if present), unscrew the pins around the perimeter of the drawer; rotate the glove compartment forward, pull off the cover cap, and remove the air filter from its housing as shown in the video. Once this is done, insert the new ventilation filter into the filter holder (ensure the filter is inserted correctly without bending it). Finally, refit the cover of the box along with all the components of the glove compartment as they were removed earlier.

Watch the video!


by ScegliAuto

More videos