Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure on our Mini

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part:

Let's see how to reset the tire pressure on our Mini. We turn on the instrument panel of our car with the key card, press the keypad located near the steering wheel (lever), we go to find the menu with the wording of tire maintenance as in the video. Based on the message on the menu we can press and confirm the reset, carefully adjust all four tires; we further check the tire pressure with the compressor inflation pressure gauge gun. Finally, we double-check everything and turn off the instrument panel at the end of the maintenance.

Posted on 19 September 2019 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Mini Countryman
How to reset the tire pressure warning light on the Mini Countryman
Mini (2010-2016 / R60, Countryman1) The activation of the TPMS light indicates a possible puncture or pressure loss from one or more tires; in this guide we will see how to reset the ti…
How to reset the tire pressure on your Mini
How to reset the tire pressure on your Mini
Mini (2014-2023 / F55, F56, F57, F54) If we realize that the low tire pressure warning light on our car has come on, we must proceed to check the inflation pressures and proceed to inflat…
Reset tire pressure warning light Mini Cooper R50 - R53
Reset tire pressure warning light Mini Cooper R50 - R53
Mini (2007-2014 / R55, R57, R56) In today's video we will see the instructions that will allow us to reset the tire pressure warning light of a Mini Cooper R50-R53; before carrying o…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos