|
Do it yourself
| |||
| ||||
Replacement of the brake sensor on a 2017 Mini Clubman.
Model: Mini Mini
F56, F54, F57, F55
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
In this video, we see that the YouTuber set out to replace the rear brake pads, but upon visual inspection, he realized that the pads did not need to be replaced; the problem was caused by the brake sensor, which was providing an incorrect reading. This component is located inside the wheel arch, behind the shock absorber, where we find a quick-release clip and some connectors, along with an electrical wire that runs to the wheel, between the two brake pads. We can find the part, for example, on auto-doc with the code FWI449 at a price of €14.77 + €9.90 for shipping. However, our onboard computer will continue to indicate that we need to change the pads, so we need to reset it. We turn on the ignition, start the car, and drive moderately for a few minutes. When the warning disappears, we press the button located on the right side of the speedometer, which will indicate that the reset is possible. We continue to hold it down until we see "reset in progress," after which we can release the button. Operation completed.
Posted on 4 January 2026 by ScegliAuto
Related tutorials
Mini
(2014-2023 /
F56, F54, F57, F55)
This guide shows how to replace the brake light bulbs of the Mini Clubman. After securing the vehicle and opening the rear doors, unscrew the Torx T2…
Mini
(2007-2014 /
R56, R57, R55)
Today, we will see the instructions to reset the brake pad service light of the Mini Clubman. First, get inside the vehicle and turn on the instrumen…
Mini
(2014-2023 /
F56, F54, F57, F55)
Replacing the brake light bulb in the Mini Clubman is a straightforward and quick task. In this tutorial, you will see how to proceed. First, ensure …
Other guides you may be interested in
|
Frequently Asked QuestionsLocation of the Jack and Spare Wheel of the Toyota Yaris
In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.495
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
