Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the bonnet of a Mini Countryman

Model: Mini Mini R60, Countryman1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To open the bonnet of a MINI Countryman, first operate the release lever located in the cabin, at the bottom of the driver's side. Next, move to the front of the vehicle and locate the safety lever positioned under the edge of the bonnet.

By operating this device, the bonnet will fully unlock and can be lifted. Once opened, the bonnet is held in position by support struts or a prop rod, depending on the vehicle version.

To close it, simply lower it a few centimetres from the lock and let it drop gently, ensuring that the locking mechanism engages correctly.


Posted on 13 July 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet on the Mini Countryman?
How to Open the Bonnet on the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In this video, we can see how to open the engine bonnet on the Mini Countryman. This is a very simple operation, although it has a small difference c…
How to open the fuel door and cap of the Mini Countryman
How to open the fuel door and cap of the Mini Countryman
Mini (2017-2023 / Countryman2, F60) These short and simple steps will show us how to open the fuel filler flap and cap of the Mini Countryman. First of all, in order to open the fuel fi…
How do you remove the front headlight of the Mini Countryman?
How do you remove the front headlight of the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In order to remove the front headlight of the Mini Countryman, you will need to open the hood to locate the screws that secure the headlight to its h…

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos