Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the speaker from the door of the Mini

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Speaker

Is the speaker of our mini damaged? Let's see the disassembly of the speaker placed in the door of the Mini. With a spatula, we pry around the cover of the door opening handle, then, remove all the screw caps placed on the door panel. Unscrew the screws inside the panel with a screwdriver, detach the same from the door with a plastic or metal spatula, disconnect any power cables. As soon as the panel is free from the screws, let's pull it off with your hands. We unscrew the tightening screws around the speaker (let's remove it). We mount the new speaker and reassemble the door panel.

Posted on 14 August 2020 by ScegliAuto

Video tutorial

Related tutorials

Removing a Door Panel in All Its Parts
Removing a Door Panel in All Its Parts
Mini (2007-2014 / R55, R57, R56) Don't know how to remove a car door panel? Let's see how to do it in this video. Pull out the plastic rivet as shown in the video, remove the round f…
Removing the cabin filter on Mini
Removing the cabin filter on Mini
Mini (2007-2014 / R55, R57, R56) Removing the cabin air filter of a Mini car, let's see how to proceed. The cabin air filter must be replaced periodically. Use a plastic lever to rem…
Removing the door panel on Mini
Removing the door panel on Mini
Mini (2001-2007 / R53, R50, R52) Let's see the disassembly of the door panel (passenger side) of a Mini. To begin, we pry around the door opening handle frame, then, we remove the sa…

Other guides you may be interested in

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos