Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Removal of the door panel in all its parts

Mini - Video tutorial

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Door panel
Operation: Removal of the door panel in all its parts

Don't know how to remove a car door panel? Let's see how to do it in this video. We pull the plastic rivet as in the video, pull the round frame of the door compartment and with a suitable spatula we go to exert a careful pressure on the sides of the door trim. Remove the relative window lifter buttons from the housing and also disconnect the motor terminals. We unscrew all the screws of the door panel and immediately after we extract the glass gently from the top, making it slide upwards. Remove the flat rubber gaskets from the door and unhook the door open lever, remove the entire panel. We disassemble the lock from the screws with all the attached wires. Now let's get ready to reinstall all the previously disassembled components going backwards. Reassembling lock with door handle, window lifter motor, door protection panel, glass and various panels. We tighten all the respective tightening screws, not forgetting to connect all the electrical terminals.


Posted on 25 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mini 2007-2014 - Why doesn't the door open on the Mini? Read Answer

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos