Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Disassembly of the Car Radio

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Car stereo

Using a plastic tool to avoid damaging the bodywork, lever at the base of the tunnel around the gear lever to release the plastic clips and move it to access the retaining screws of the glove compartment. Remove the centre tunnel by gently lifting it upwards and disconnect the connector of the cigarette lighter. Position the gear lever in the central position and gently push upwards on the frame and the gear lever cover, simultaneously moving the gear knob in circular motions while pulling it upwards until it is completely removed. Remove the ashtray drawer by disconnecting it from the plastic clips at the bottom. Now it is possible to remove the side walls of the tunnel to access the retaining screws of the radio.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Mini Cooper car radio
Remove Mini Cooper car radio
Mini (2001-2007 / R52, R50, R53) We replace the radio of the Mini Cooper if it is damaged or if it is worn out. Let's see the disassembly of the radio. We disassemble the plastics on…
Removing the Dashboard on a Mini
Removing the Dashboard on a Mini
Mini (2007-2014 / R56, R57, R55) Follow the steps to remove the dashboard of a Mini while taking out the original radio. Use a screwdriver to unscrew the securing screws of the air v…
How to disassemble the original car radio on a Mini
How to disassemble the original car radio on a Mini
Mini (2001-2007 / R52, R50, R53) Let's see the disassembly of the original car radio on a Mini, let's see how to carry out the various operations: with a screwdriver unscrew the tigh…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos