Do it yourself
Frequently asked questions about cars and motorcycles

2012 Mini battery replacement

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Battery

How to replace the battery of the Mini 2012? Let's see how the old battery is removed from inside the dedicated compartment. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front bonnet, releasing the locking lever of the same with the fingers, then we put it in safety. We will find the battery cover at the top left; remove the cover and disassemble the locking pins of the battery terminals, then, remove it from the engine compartment. We mount a new battery in the housing together with the electrical terminals and the cover.

Posted on 20 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Mini (2007-2014 / R57, R55, R56) Good morning, today's goal is to replace the battery of our Mini Cooper key. Let's start by unhooking and removing the back cover of the key, leverag…
Mini (2001-2007 / R52, R53, R50) The battery of our Mini Cooper is located inside the engine compartment. To perform the replacement, we start by opening the front hood. Once the hoo…
Mini (2017-2023 / F60, Countryman2) The replacement of the Mini Countryman battery is done by opening the hood, so that access can be gained to the components located inside the engine …

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the battery of a Mini One located? Read answer

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos