Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Replacing the front light bulb on a Mini car

Mini - Video tutorial

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Headlight bulb
Operation: Replacing the front light bulb on a Mini car

Lift the hood and put on the special support rod. Remove the rear cover of the light and, first, disconnect the connector. Once this is done, you will notice that behind the H4 bulb there is a small metal catch, similar to a paper clip: open this catch. Already done! At this point all you have to do is extract the bulb from its seat and insert a new one you purchased. Then, of course, proceed backwards. Then close the metal latch, plug in the connector and remember the rear cover, which will protect the inside of the headlight from dirt and dust.


Posted on 26 January 2024 by ScegliAuto

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos