Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Replacing the window motor on Mini R50

Mini - Video tutorial

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Starter motor
Operation: Replacing the window motor on Mini R50

This video shows you how to remove the window motor from the door. Before getting to this you will obviously have to remove the door panel itself (if you don't know how to do it, I refer you to our other tutorials). After doing this, use an iron tool and a rubber hammer to get the metal wheels shown in the video out. In this way you can remove the window glass which will be free. At this point unscrew the three screws that fix the motor. After having completely "emptied" the door, proceed backwards by reassembling the motor, the gears of the window and the glass of the same.


Posted on 29 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mini 2007-2014 - Where is the starter motor located on the Mini Cooper? Read Answer
    • Mini 2007-2014 - How much does it cost to replace the starter motor on the Mini Cooper? Read Answer
    • Mini 2007-2014 - Where is the starter motor located in the Mini Cooper? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos